Instrumental conditioning, the use of reinforcement and punishment, is used when training horses and these procedures may have different consequences regarding animal welfare. The aim of this study was to investigate what kind of reinforcers that are used in training horses and when these reinforcers are used. This study has its focus on positive reinforcement and its advantages and disadvantages. Interviews of five A-level and B -level equestrian coaches about their training methods were conducted to complement the literature search and give a greater understanding to why certain methods are used or not in training horses. The results show that negative reinforcement seems to be the foundation of training horses whereas positive reinforcement is used but not to the same extent.

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Dogs have been held as pets for thousands of years. Dogs held today usually get some sort of training some time during their life. You can train dogs for many different reasons such as general obedience or you can train them for competition. When training a dog every behaviour is followed by a consequence. These consequences are positive reinforcement, positive punishment, negative punishment and negative reinforcement.

In this thesis I discuss and analyze different factors, and different circumstances, that influence identity negotiation among the north american indians. I do this mainly by using two models.The first one is Druckmans three dimensions of identity; negotiating identity, durability of identity and spread of identity. Depending on how the identity fits in these dimensions one can se if, or how, they influence the negotiability.My second model for analyzing is Reeds ?fasteing and unfastening identity?, using this model I have tried to understand during what circumstances the identity is negotiable. The identity is more or less negotiable depending on where the indians live, who they are living with and also on their inheritance.My results shows that the indian identity is changing and developing over time but the main characteristics still remains the same.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

Injuries and sick-leave is a common feature for reinforcement workers today. This is mainlydue to the fact that reinforcement work is done in an exposed environment with many stressfactors and highly repetitive work. These operations are often carried out in unsuitableworking positions, these positions creates a major burden on the bones and joints and causesmicro- damages on muscles. With repetitive work these injuries are not given time to healproperly and will gradually become worse.The body will not be able to handle the stress of working in a work environment such as thisand musculoskeletal disorders can be a result of this. The injury will make itself known aspain in the musculoskeletal system and causes reduced movability; the injured worker willtherefore not be able to perform the same work tasks as before.

Today, we use BKR and BBK 04 when designing concrete structures inSweden, which will, in the near future, be replaced by Eurocode 2. When you are designing buildings, you will use Eurocode 2 Part 1-1 and with this new standard, some new rules and general rules will be necessary to adopt. To examine how BKR and BBK 04 tells apart from Eurocode 2 when designing concrete structures, one beam and one column with often common dimensions, is studied. The beam is designed with consideration of (considerate to) durability at bending moments, shear forces and control of cracking. The column is designed with consideration of durability at eccentric axial load and bending moments in cross section on account of (due to) geometric imperfections. BBK 04 has gone one step closer to Eurocode 2 than earlier editions and the things that are different, when calculating reinforcement, is how they use the partial factors.

Statistics of occupational injuries show that bricklayers are among the most exposed, with heavy lifting by far the most common cause of long-term sick leave. Prefabricated brick beams create yet another risk of injuries that can be prevented by auxiliary equipment or alternative solutions. From articles, interviews with masons and from a survey carried out in conjunction with this report, it appears that there are frequently difficulties in the use of available means for lifting and handling. Previous studies on the subject of transverse reinforcement in masonry beams indicate a viable method for bridging large openings in masonry walls. This bachelor thesis delves into whether the idea could be realized in today's brick construction with a view to improving occupational health and safety.

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

Vid uppritandet av byggmodeller på WSP Group i Norrköping använder man idag två program: TEKLA Structures och AutoCAD Architecture. En av anledningarna till detta är att armeringsverktyget Impact Reinforcement i AutoCAD Architecture fungerar bättre än armeringsverktygen i TEKLA Structures. Då man behöver armering i en TEKLA Structures modell exporteras denna till AutoCAD Architecture där armeringsjärnen sedan ritas in. Jag har därför undersökt skillnaderna mellan de båda programmens armeringsverktyg, resultatet är att Impact Reinforcement är lättare att använda medan TEKLA Structures tar längre tid att lära sig, men skulle kunna göra arbetet effektivare med rätt kunskaper..

AbstractWhen immigrants move to Sweden from their native country it is not unusual that they experience some kind of identity crises. Their own experience of their cultural identity can be very problematic and they often lose a part of what they previously saw as their own identity. To handle such crises the immigrants can use different strategies. They can for example accept their disparity, deny it or emphasize it. The aim of this study is to examine how immigrants in Sweden experience that their cultural identity has changed since they moved here from a country that has a culture that is different from the Swedish culture.

European identity is a topic constantly debated around Europe. There are many takes on whether there is a European identity and what the European identity consists of. In the European Union the Commission has worked towards developing a common European identity since the middle of the 1970?s. The development of a European identity is an important part in the commission?s quest to tie the union and its people closer together.

The purpose of this thesis was to illuminate how companies work with their brand identity and particularly how it is applied in their positioning. The empirical data has been collected through interviews with two companies in Sweden working with brand identity as a stated strategy. The study shows that companies discover, develop and build their brand identity based on their core identity and core values. The core value can be strengthened through customer satisfaction surveys. In order to develop the brand identity in companies, management has to be aware of their brand person- ality, as an essentiality for survival.

Identity and immigration                                                                                                            - A qualitative study with unaccompanied refugee children Jennie Hamberg Larsson and Matthew McNeillThe main purpose of this study is to illuminate and describe how unaccompanied refugee children experience changes and reconstructions to their identity after immigration to Sweden. Using qualitative interviews this study looks at how social relationships in Sweden and a foreign background influence the reconstruction of unaccompanied refugee children´s identity. The base for our analysis is identity theory while roll concepts, social identity theory and concepts of ethnic and national identity are used to give deeper insight into the experiences of three unaccompanied refugee children. Important results found included a connection between the way that identity is formed in relationships, especially with significant others, in the country of origin and how reconstruction of identity develops in the new country with new social relationships. Furthermore the results showed how this reconstruction of identity can be linked to different acculturation strategies that incorporate the importance of an ethnic identity and a national identity.Keywords: identity, ethnic identity, unaccompanied children, immigration.